Racing Stripe Decal Pack of 4 Assorted Widths

Description

A four-piece racing stripe decal set in assorted widths, cut from Cast Vinyl for trucks, SUVs and daily drivers. Made for buyers upgrading their 4Runner look with clean, layered stripes.

Four Widths, One Cohesive Toyota Racing Stripes Look

This pack takes the guesswork out of building a layered stripe layout. You get four decals in assorted widths, so you can pair a wide center stripe with narrower accent lines, run them side by side down the hood, or split the set between the hood and tailgate. Because the widths are already matched, the spacing looks intentional instead of pieced together from separate orders. It works well on trucks and SUVs with long, flat panels, and the assorted sizes give you room to trim around body lines if you want a custom fit. Whether you want a subtle twin-stripe accent or a bolder full-length layout, the four-width format lets you dial the look to your taste.

Choose Your Size: 4, 8, 12 or 18 Inches

The pack is offered in four decal sizes: 4, 8, 12 or 18 inches. Smaller sizes suit tailgates, fenders, toolboxes and window accents, while the larger options are made for hoods, roof panels and full-length side runs. Each set includes the same four-width assortment, scaled to the size you pick, so the proportions stay consistent no matter which option you choose. If you are planning stripes that run the length of the vehicle, the longer sizes give you more uninterrupted coverage per piece. If you want a small accent instead, the shorter sizes keep the layout tight and easy to position. Measure your panel before ordering to confirm which size fits your build.

Matte, Gloss, Static Cling and Clear Finish Options

Every stripe in this pack is printed in your choice of matte, gloss, static cling or clear vinyl. Matte gives a low-sheen, painted-on appearance that blends with flat or Low-Gloss factory paint. Gloss adds shine that stands out against most paint finishes. Static cling uses no adhesive, so it peels off cleanly and can be repositioned, which makes it a good pick for temporary displays or if you like changing your layout. Clear vinyl works well when you want the stripe to read subtly against the panel underneath. All options are cut from quality cast or calendered vinyl, chosen based on the finish you select, and each is ready for outdoor use on a daily driver.

Easy Application and Care Tips

Application is a straightforward peel-and-stick process. Clean the panel with isopropyl alcohol and let it dry fully, then position each stripe before removing the backing, using painter's tape as a hinge if you want precise alignment. Work from the center outward with a squeegee or soft card to push air toward the edges, and remove the transfer tape slowly at a low angle. Avoid applying in cold weather or direct sunlight; a mild, shaded surface gives the best results. Once applied, the stripes can be washed by hand with mild soap and water. Skip high-pressure sprays directly at the edges and avoid automated brush washes to help keep the lines lifting-free for as long as you run them.

What you get

• Pack of 4 racing stripe decals in assorted widths for layered layouts
• Available in 4, 8, 12 or 18 inch decal sizes
• Finish options: matte, gloss, static cling or clear vinyl
• Cut from cast or calendered vinyl depending on finish selected
• Peel-and-stick application with transfer tape included
• Suitable for hoods, tailgates, fenders and side panels
• Made to order in our US

Specifications

Frequently asked questions

Can I trim the stripes to fit around body lines?

Yes. The vinyl can be trimmed with a sharp hobby knife before or after application. Many buyers trim the ends at body panel gaps so each stripe ends on a panel edge for a cleaner look.

What is the difference between static cling and the adhesive finishes?

Static cling uses no adhesive, so it can be removed and repositioned without residue, making it best for temporary use. Matte, gloss and clear finishes use adhesive for a more permanent hold on exterior panels.

Which size should I choose for hood stripes?

It depends on your coverage goals. The 12 and 18 inch sizes work well for full hood runs, while 4 and 8 inch sizes suit accents, tailgates or fenders. Measure your panel first to confirm fit.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.