By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A gloss vinyl "Diesel Only" decal made for marking fuel tanks, transfer tanks and storage drums so the right fuel goes in every time. Cut from durable Cast Vinyl in your choice of 4, 8, 12 or 18 inch sizes.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
Misfueling happens fast. One distracted moment at the pump and gasoline ends up in a diesel tank, which means downtime, drained lines and a repair bill nobody wants. A clear "Diesel Only" label on the fill neck is the simplest way to prevent it. This diesel only fuel gas tank sticker decal is cut from Cast Vinyl with a gloss finish that stands out against metal, plastic and painted drum surfaces. It applies in minutes with a dry or wet method, conforms to gentle curves around tank bodies, and reads clearly from a distance so anyone holding a nozzle gets the message before they pull the trigger. Choose the size that matches your tank and get back to work with one less thing to worry about at the pump.
These decals are printed and cut on Cast Vinyl, the conformable film that hugs curved tank walls and drum shoulders without lifting at the edges. The gloss finish gives the lettering a clean, wet-look contrast that stays legible in low light and at a glance. The adhesive is engineered for exterior use, so it holds through washes, rain and the grime that collects around fuel fill points. While no decal is immune to every condition, a properly applied Cast Vinyl label resists peeling and fading far better than paper tags or hand-lettered markings that wash off after the first storm. Wipe the surface clean, squeegee it down, and the label stays put season after season.
Every tank is different, so this decal comes in four widths: 4, 8, 12 and 18 inches. The 4 inch size works for small portable tanks, jugs and toolboxes where space is tight. The 8 and 12 inch options suit standard transfer tanks, saddle tanks and farm drums where you want the warning readable from a few steps away. The 18 inch decal is made for large stationary tanks, bulk containers and trailers where visibility from across a yard matters. Measure the flat area near your fill neck before ordering, and add a little clearance on each side so the decal sits on smooth surface rather than wrapping over a seam or weld bead.
Start with a clean surface: wipe the tank area with isopropyl alcohol and let it dry completely so dust and fuel residue do not get trapped under the film. Peel the backing, position the decal, and use a squeegee or credit card from the center outward to press out air. On larger sizes, a spray of soapy water lets you slide the decal into position before squeegeeing the water out. Avoid applying in freezing temperatures or on a tank that is wet with fuel. Once pressed down and left to bond, the decal can be cleaned with mild soap and water. If you ever need to remove it, warm it gently with a hair dryer and peel slowly.
Yes. The Cast Vinyl adhesive bonds to clean, smooth plastic as well as painted metal and steel drums. Clean the area with isopropyl alcohol first and let it dry fully before applying.
Most customers choose the 8 or 12 inch size for transfer tanks, since the lettering stays readable from a few feet away. Use the 4 inch size for small containers and the 18 inch size for large stationary tanks.
Apply above freezing whenever possible. Cold surfaces reduce adhesive bonding. If the tank is cold, move it to a heated space or wait for a warmer day, and always apply to a dry surface free of fuel residue.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
