By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A sheet of diesel fuel only labels for marking tanks, cans and filler necks so the wrong fuel never goes in. Printed on vinyl in your choice of four decal sizes for shops, farms and fleets.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
One misplaced nozzle at the pump can turn into a tow bill, a drained tank and a lost day of work. A clear diesel only fuel gas tank sticker decal placed right where you or a coworker reaches for the filler takes the guesswork out of fueling. These labels read DIESEL FUEL ONLY in bold lettering sized to be seen at a glance, even on a dusty tank in low light. They suit pickup trucks, Off-Road equipment, farm tanks, transfer cans and generators. If more than one person fuels your equipment, or you run both gas and diesel machines from the same shed, labeling each tank is the simplest way to keep unleaded out of a diesel system and diesel out of a gas can.
Every tank is different, so this kit is offered in four decal sizes: 4, 8, 12 or 18 inches. The 4 inch labels sit neatly on jerry cans, small generator tanks and toolbox lids. The 8 inch size works well on pickup filler doors and mid-size transfer tanks. The 12 and 18 inch options give you big, readable markings for bulk tanks, saddle tanks on heavy equipment and fuel stations. Each kit is printed as a label sheet with multiple labels, so you can mark several containers from one order or keep spares on hand for new equipment. Pick the size that matches where the label will live before ordering, since readability depends on distance.
Choose the finish that fits your application. Matte is a low-sheen option that cuts glare, a good pick for tanks that sit outdoors in direct sun. Gloss gives the lettering extra punch and wipes clean easily when the tank gets grimy. Static cling applies without adhesive, so it can be repositioned or removed without residue, ideal for rental equipment or borrowed tanks where a permanent label is not wanted. Clear vinyl lets the label blend with painted surfaces so only the wording stands out. All finishes are printed with inks designed to hold up to fueling splashes, wiping and normal outdoor handling around the tank area.
Installation takes a few minutes with no special tools. Wipe the surface clean and let it dry completely, since dust and fuel film are the main reasons labels peel early. Peel the label from the sheet, position it beside the filler neck or on the flattest part of the tank, and press from the center outward to push out air. For static cling, a light mist of water on smooth surfaces helps you slide it into place before squeegeeing it down. Avoid applying in freezing temperatures or on a tank that is wet from a recent fill. Pressed onto a clean, dry surface, the labels sit flat and stay legible through regular fueling and wiping.
Each sheet includes multiple diesel fuel only labels in the decal size you select, so you can mark several tanks or cans from a single order and keep spares for future equipment.
The 4 or 8 inch size usually fits a filler door well. Use 12 or 18 inch labels on bulk tanks, transfer tanks or heavy equipment where the marking needs to read from farther away.
The vinyl and inks are printed to handle normal fueling-area conditions, including occasional splashes and routine wiping. Wipe spills off the label rather than letting fuel pool on it.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications