By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A glossy Vinyl Decal sheet, 12 inches wide, cut to your choice of 4, 8, 12 or 18 inch lengths. For crafters, small shops and anyone who prints or hand-cuts their own decals.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This listing is for a single sheet of glossy vinyl sticker paper, 12 inches wide, sold by the decal length. Choose 4, 8, 12 or 18 inches depending on the project: a 4 inch strip works well for small logos and hand-lettered labels, while an 18 inch sheet gives you room for larger decals or a full cutting-mat layout. The gloss surface takes ink, paint markers and vinyl-safe inks cleanly, so designs keep crisp edges whether you cut by hand, with a craft knife or on a cutting plotter. It is a simple blank canvas for makers who want to control their own artwork from start to finish, without buying a pre-printed design.
The sheet is printed on Cast Vinyl with a high-gloss top layer, the same material family we use for our printed decals. Cast Vinyl conforms to gentle curves better than thicker calendered films, which matters if your finished decal is going on a tumbler, a laptop lid or a vehicle door panel. The gloss finish adds depth to colors and gives artwork that smooth, wet-look surface people expect from a finished decal. The back of the sheet carries a release liner, so you can cut your design, peel it away and apply it without the sheet curling or tearing on you mid-project.
Work with the sheet at room temperature and on a clean, dry surface. If you use a cutting plotter, a standard vinyl setting with a light test cut is a good starting point, since Cast Vinyl is thinner than calendered film. For hand cutting, a fresh blade and a steady straightedge give the cleanest results. When applying the finished decal, clean the target surface first with isopropyl alcohol and let it dry fully. Position the decal, press from the center outward, and work air bubbles toward the edges. On curved surfaces, go slowly and let the vinyl stretch into place rather than forcing it.
Makers use blank decal sheets like this for a wide range of projects: custom water bottle labels, small-batch product packaging seals, laptop and tablet skins, planner embellishments, car window lettering, and prototype decals before committing to a full print run. Small businesses often keep a few sheets on hand for short-run branding jobs, while hobbyists like the freedom to draw, print or cut one-off designs at home. Because you choose the length, you can match the sheet to the job instead of paying for material you will not use.
It is a blank, unprinted glossy vinyl sheet. You can draw or letter directly on it with paint markers or vinyl-safe inks, or cut shapes from it with a craft knife or cutting plotter. Check that your printer is rated for vinyl sheet media before feeding it through.
All options are the same 12 inch wide glossy vinyl sheet; the number you choose is the length of the sheet. Pick a shorter length for small decals and labels, or a longer one for larger designs and multi-piece cutting layouts.
Yes, the Cast Vinyl conforms to gently curved surfaces like tumblers, laptop lids and vehicle body panels. Clean the surface with isopropyl alcohol first, let it dry, and press the decal from the center outward to avoid trapped air.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
