By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A matte black Cast Vinyl windshield decal sized at 18 inches, made for Ram truck owners who want a clean, low-shine banner across the glass. Also available in 4, 8 and 12 inch sizes.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This decal was designed with Ram truck windshields in mind, cut in a wide banner style that sits comfortably along the top of the glass. The matte finish absorbs light instead of bouncing it back, so the lettering reads as a solid, factory-look stripe rather than a shiny sticker. At 18 inches wide, it makes a clear statement without crowding the view. It also pairs naturally with the rest of our ram & dodge ram 3500 decals collection if you are building a matched set across your cab windows, tailgate or tool box. Every piece is cut to order in our and shipped ready to apply.
We print this decal on matte Cast Vinyl, a thin, flexible film that conforms to curved glass without lifting at the edges. The matte surface resists glare in direct sun, which is the main reason buyers choose it over a gloss finish for windshield placement. There is no shine to compete with reflections off the dash, and the black stays deep and even. Because Cast Vinyl is dimensionally stable, the decal holds its shape through heat and cold cycles instead of shrinking or puckering. Application is a standard peel-and-place process with transfer tape, and it can be smoothed out with a squeegee or a soft card in a few minutes.
Size is mostly about how much windshield you want to fill. The 18 inch version is the boldest option and works well on full-size truck glass where a wide banner balances the overall width. The 12 inch size suits smaller windshields or a more subtle top-corner placement. The 8 and 4 inch sizes are popular for side windows, quarter glass, toolboxes, coolers and laptop lids. All four sizes are cut from the same matte Cast Vinyl with identical artwork, so you can mix sizes across a build and keep a consistent look. Measure your glass before ordering and leave a little clearance at the edges for wiper travel and inspection stickers.
Start with clean, dry glass at moderate room temperature, free of wax or rain repellent residue. Position the decal with a light tack first, confirm alignment, then squeegee from the center outward to push air toward the edges. Peel the transfer tape slowly at a shallow angle and press the decal down once more. After application, avoid car washes with high-pressure sprays aimed directly at the lettering for the first day or so. For removal later, warm the decal gently with a hair dryer and peel it away; the matte Cast Vinyl is engineered to come off glass without hard scraping when heat is used.
The 18 inch size is cut for wide truck glass, but windshields vary. Measure the flat area where you plan to place the decal and compare it to the 18 inch width before ordering. If you want a smaller footprint, the 4, 8 and 12 inch sizes use the same artwork.
Matte is the more popular choice for windshield banners because it cuts glare and reads as a solid stripe in direct sun. Gloss reflects more light and can flash bright off the dash. Both are printed on the same Cast Vinyl, so it comes down to the look you prefer.
Yes. Warm the decal with a hair dryer and peel it slowly at a shallow angle. The Cast Vinyl releases cleanly from glass with heat, and any remaining adhesive can be cleaned off with glass cleaner.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
