By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A two-tone body stripe decal kit sized for compact crossover SUVs, cut from durable Cast Vinyl in your choice of matte, gloss, clear or static cling finish. A straightforward way to add a custom striping look without paint.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This decal kit is designed with the proportions of a compact crossover in mind, so the stripe layout works with the hood, roof and body panels rather than fighting them. Each stripe is cut to follow the long, clean lines of the vehicle, giving a sporty dual-stripe look once applied. Choose the decal size that fits your build, from a subtle 4 inch accent up to a bold 18 inch set, and pair it with the finish that matches your taste. It is a popular pick among shoppers browsing honda cr-v decals who want a custom appearance that can be changed later without repainting the vehicle.
Every kit is printed and cut in our using quality Cast Vinyl, available in four finishes. Matte gives a low-sheen, painted-on look that blends into modern factory paint. Gloss adds shine and depth that stands out against flat paint. Clear finishes create a subtle tone-on-tone effect over darker vehicles. Static cling versions apply without adhesive, so you can reposition or remove them whenever you like, which makes them a good choice for leased vehicles or anyone who wants a temporary look. Whichever finish you pick, the vinyl is cut cleanly with smooth edges and arrives weeded and masked, ready to position and install.
Installation is a weekend-friendly project with basic tools. Start with a clean, dry surface, ideally applied in moderate temperatures away from direct sun. Lay out the stripes first to confirm placement, then work from the center outward using a squeegee or soft card to press the vinyl down and push air out toward the edges. The mask keeps the stripe aligned during placement, and once it is peeled away you can go over the edges again to seal them down. Take your time on curves and body creases, warming the vinyl slightly helps it conform. One person can handle smaller sizes, while a helper makes aligning longer stripes easier.
After installation, wash the vehicle gently and avoid high-pressure spray directly at the stripe edges for the first day or two. For long-term care, hand washing is the gentlest option and keeps the edges lying flat. When you are ready for a change, warm the vinyl and peel it back slowly at a shallow angle, then clean off any residue with a mild adhesive remover. Each kit includes the full stripe set plus application instructions. If you are ordering for a specific build or want a different size than the standard options, reach out before ordering and we will help you pick the right decal size for your project.
The kit is cut in standard decal sizes of 4, 8, 12 or 18 inches and is designed for the body lines of compact crossover SUVs. Choose the size that best matches your build, and trim-to-fit adjustments can be made during installation if needed.
Matte blends in for a painted look, gloss adds shine, clear creates a subtle effect over dark paint, and static cling is best if you want a removable, no-adhesive option such as on a leased vehicle.
Yes. Warm the vinyl with a hair dryer or heat gun on a low setting and peel it back slowly at a shallow angle. Clean any remaining residue with a mild adhesive remover.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
