By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A gloss vinyl racing stripe decal kit for Toyota Tacoma owners who want a motorsport look without a paint. Cut from Cast Vinyl in your choice of four decal sizes.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This decal kit brings a classic dual racing stripe layout to your truck bed, tailgate, hood or side panels. Each stripe is cut from gloss Cast Vinyl with a smooth, shiny surface that reads like painted striping from a few steps back. The kit is sized by decal height, so you can pick the stripe width that matches the look you want, from a subtle accent to a bold track-inspired statement. Whether you drive your Tacoma to the trailhead or the hardware store, the stripes add a personal touch that survives daily use. Application is a dry or wet peel-and-stick process you can complete in your driveway with a squeegee and a little patience.
A gloss finish is the traditional choice for racing stripes because it catches light the same way a clear coat does. On a clean, waxed truck the stripes blend into the paint line so smoothly that most people assume they were sprayed on. The vinyl resists fading from sunlight and holds up against car washes, road grime and weather. If you change your mind later, the stripes can be warmed and peeled away without leaving adhesive residue behind. For a different look, the same stripe layout is also available in matte, clear and static cling finishes, so you can sample the style temporarily before committing to a permanent gloss set.
This kit is offered in four decal sizes: 4, 8, 12 and 18 inches. The 4 inch size suits narrow accent stripes along door edges, mirrors or the tailgate. The 8 inch size works well for a standard dual-stripe layout running the length of the hood or bed. The 12 and 18 inch sizes make a bold statement across the hood or down the bedside panels, filling the space with a wide motorsport band. Measure the panel you plan to dress before ordering, and remember the listed size refers to the decal height, not the total kit width. Larger sizes cover more surface and create stronger contrast against the paint.
Start with a freshly washed and fully dried truck, working in shade so the surface is cool to the touch. Lay each stripe out first to confirm placement, using painter's tape to hold the position. Peel the backing, mist the panel lightly if you prefer a wet install, and lay the stripe down from the center outward with a squeegee to push out air and moisture. Keep tension even on long runs so the stripe tracks straight. Avoid stretching the vinyl around sharp curves, and let the adhesive set for a day before washing. With care, the stripes sit flush and smooth with no bubbles or lift at the edges.
The stripes are universal cut decals sized by height rather than pre-cut to a specific panel, so they can be trimmed to fit your hood, bed or tailgate. Measure your panel and choose the decal size that matches the coverage you want.
Yes. Warm the vinyl with a hair dryer or heat gun on a low setting and peel slowly. Any leftover adhesive can be cleaned off with a mild adhesive remover. Avoid applying stripes over fresh or repainted surfaces that have not fully cured.
Lifespan depends on climate, sun exposure and how often the truck is washed. Gloss Cast Vinyl is made to hold up outdoors, but we do not promise a specific service life. Keeping the truck garaged and hand washing extends the look.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
