Matte Frosted Stripe Window Graphic Decal 4-18 Inch

Description

A frosted stripe window Graphic with a matte finish that softens glass surfaces and adds privacy. Cut in decal sizes of 4, 8, 12 or 18 inches for home, office and retail windows.

Frosted Stripe Look on Glass

This frosted stripe window Graphic gives plain glass a clean, etched-glass appearance without the cost of custom glazing. The matte finish diffuses light instead of bouncing it back, so the stripe reads as a soft, uniform band rather than a shiny sticker. It works well on storefront display windows, office partitions, sliding doors and bathroom windows where you want to break up visibility without blocking all the daylight. The horizontal stripe layout creates a simple, modern rhythm across the pane, and because it is cut from matte vinyl sticker paper, it keeps a low-sheen look even under bright overhead lighting. Choose the width that fits your pane and position the stripe wherever it suits your space.

Matte Vinyl Sticker Paper You Can Trim and Trust

Each Graphic is printed on matte vinyl sticker paper, the same material we use across our matte decal collection. The face film lays flat with minimal glare, and the adhesive backing holds to smooth glass without bubbling when applied with a wet or dry method. Because the material is flexible, you can trim the stripe with a sharp craft knife after installation if your window has an unusual width or an obstruction like a handle. The matte surface also hides small fingerprints and water spots better than a gloss finish would, which matters in kitchens, bathrooms and high-traffic entryways. Clean it with a soft cloth and mild soapy water.

Choosing Between 4, 8, 12 and 18 Inch Widths

The stripe is offered in four decal widths so you can match the scale of your window. A 4 inch stripe suits narrow sash windows, cabinet glass and small sidelights next to a door. The 8 inch width works well on standard residential windows and shower enclosures where you want partial privacy at eye level. At 12 inches, the stripe covers enough of the pane to screen desks, shelving or display areas, making it a common pick for office partitions. The 18 inch width is the broadest option and is best for large storefront or picture windows where a single bold band makes a stronger visual statement. Measure your glass before ordering.

Applying Your Window Graphic Step by Step

Start by cleaning the glass with glass cleaner and letting it dry fully, since dust and residue are the main cause of lifting edges. Mark light pencil guides or use low-tack tape to keep the stripe level as you position it. Peel the backing a little at a time and smooth the Graphic down with a squeegee or a credit card wrapped in a soft cloth, working from the center outward to push air to the edges. If a bubble remains, pierce it with a pin and press flat. The Graphic can be repositioned briefly during installation while the adhesive is fresh. To remove it later, warm it gently with a hair dryer and peel slowly.

What you get

• Frosted stripe design printed on matte vinyl sticker paper
• Available in 4, 8, 12 or 18 inch decal widths
• Low-glare matte finish that diffuses light like etched glass
• Adds partial privacy while letting daylight through
• Adheres to smooth glass, mirrors and glossy flat surfaces
• Trim-friendly material for custom window widths
• Removable with gentle heat when you want a change

Specifications

Frequently asked questions

Will this stripe block light from the room?

No. The frosted matte effect diffuses light rather than blocking it, so the room keeps most of its daylight while the glass gains partial privacy.

Can I use this on a bathroom window or shower door?

Yes, it adheres to smooth interior glass. Wipe it with a soft cloth and mild soapy water, and avoid abrasive cleaners that could scratch the matte surface.

What if my window is wider than the decal?

You can trim the Graphic with a sharp craft knife after applying it, or order multiple decals and align them edge to edge to cover a wider pane.