Racing Stripe Vinyl Decal Kit | Matte, Gloss & Clear

Description

A pair of racing stripe decals cut from Cast Vinyl, made for drivers who want a clean motorsport look on their daily sedan or coupe. Available in 4, 8, 12 or 18 inch sizes with matte, gloss, clear and static cling finishes.

A Racing Stripe Pair That Completes Your Graphics Kit

Each order arrives as a matched left and right stripe set, so both sides of the car carry the same cut, the same width and the same finish. The stripes are die cut from Cast Vinyl, which contours smoothly over gentle body curves and holds its edge without lifting at the tips. Whether you are building a full graphics kit across the hood and doors or adding a single accent over the fender, the set gives you a consistent starting point. Choose the size that matches your panel, pick a finish that suits the paint, and apply both stripes in one session for a balanced, symmetrical look that reads as intentional rather than pieced together.

Choose the Finish That Matches Your Paint

Matte cut vinyl sits flat against glossy paint and gives the stripe a low-key, motorsport-inspired contrast that photographs well in daylight. Gloss finish blends with a clear-coated surface so the stripe looks painted on rather than stuck on. Clear vinyl works when you want a subtle protective layer or a barely-there accent, and static cling lets you test placement before committing, since it holds without adhesive and peels away cleanly. Every option is printed and cut in our US. If you change your mind later, a matte or gloss stripe can be removed with heat and patience, while static cling simply lifts off with a fingernail.

Sizing Guide for the Four Decal Sizes

The 4 inch stripe suits narrow accents, mirror backs, interior trim or a subtle tail panel touch. The 8 inch size works well on fenders, rocker panels or the lower door line. The 12 inch stripe covers hoods, trunks and roof sections where you want the stripe to read clearly from a distance. The 18 inch size is the boldest option, made for wide hoods, full door panels or a statement stripe running along the side of a truck bed or camper shell. Measure the panel you plan to dress before ordering, and remember the listed size refers to the stripe width. Both stripes in the set share the same dimensions.

Applying Your Stripe Decals Step by Step

Start with a clean, dry, wax-free surface; a wipe with isopropyl alcohol removes residue that weakens adhesion. Position each stripe with masking tape as a hinge, peel the backing a few inches at a time, and squeegee from the center outward to push air toward the edges. On curved areas, warm the vinyl lightly with a hair dryer so it stretches around the contour instead of tenting. Work in the shade on a mild day, since extreme heat or cold makes application harder. Leave the transfer tape in place for an hour or two, then pull it back at a sharp angle. Keep the car dry for the first day so the adhesive sets fully.

What you get

• Matched left and right stripe pair for a symmetrical look
• Cut from Cast Vinyl that conforms to gentle body curves
• Four finish options: matte, gloss, clear and static cling
• Available in 4, 8, 12 and 18 inch decal sizes
• Printed and die cut in our US
• Removable with heat when you want a change
• Static cling option allows repositionable, adhesive-free placement

Specifications

Frequently asked questions

Do both stripes come in one order?

Yes. Each order includes a matched left and right stripe pair with transfer tape, so you can dress both sides of the vehicle in a single session.

Which size should I choose for my hood?

For most hoods, the 12 or 18 inch stripe gives the clearest look, while 4 and 8 inch sizes work better on fenders, mirrors and trim. Measure your panel first, since the listed size refers to stripe width.

Can I take the stripes off later?

Matte, gloss and clear vinyl can be removed by warming the decal with a hair dryer and peeling slowly. Static cling lifts off with no adhesive residue at all, which also makes it a good way to test placement first.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.