By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
Turn your boat's logo into a clean, weather-ready Vinyl Decal in your choice of matte, gloss, clear or static cling. Cut in 4, 8, 12 or 18 inch sizes for hulls, transoms and windows.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
Your boat's logo is its signature, and it deserves better than a printed sticker that fades after one summer on the lake. We cut each boat logo Vinyl Decal from solid cast or calendered vinyl, so the color runs all the way through the material instead of sitting on top. That means no peeling print layers, no flaking edges, and a crisp outline that holds up to spray, sun and trailering. Send us your artwork in vector format if you have it, or a clean high-resolution image and we will prep it for cutting. Whether it is a marina brand, a fishing club Graphic or a family crest for the transom, we treat every logo like it is going on our own boat.
Choose the finish that fits the look you want. Matte vinyl sits quietly on white and off-white gelcoat and keeps glare down on bright days. Gloss vinyl gives the logo a wet, painted-on shine that matches most factory graphics. Clear vinyl works when your design needs a subtle, tinted look on glass or dark surfaces. Static cling is the pick for windows and smooth cabin glass when you want a decal you can reposition or remove without adhesive residue, ideal for seasonal slip tags or event logos. Every decal is offered in 4, 8, 12 or 18 inch sizes, so you can scale the same artwork across a console, a transom and a dock box.
Ordering takes about two minutes. Pick your size and finish, upload your logo file at checkout, and add any notes about color, orientation or placement. Vector files such as AI, EPS, SVG or PDF give the sharpest cut lines, but a large PNG or JPG usually works fine for simple one or two color logos, and we will confirm with you before cutting if anything looks off. If your logo has fine detail or thin connecting strokes, we may suggest slight adjustments so the vinyl holds together during application. You approve the final proof before anything goes to the cutter. Nothing ships until you are happy with how your custom logo sticker will look on the boat.
Application is a dry afternoon job, not a project. Clean the hull or window with isopropyl alcohol and let it dry completely so no wax or salt film sits under the adhesive. Position the decal with masking tape as a hinge, peel the backing, and squeegee from the center outward to push out air. On curved sections of the bow or transom, go slow and let the vinyl stretch slightly rather than forcing it, and save the heat gun for cold mornings when the material feels stiff. Static cling versions skip the adhesive entirely: mist the glass, press the decal in place and squeegee out the water. Full step-by-step instructions ship with every order.
We cut from a set stock palette of solid vinyl colors, so we get as close as possible rather than an exact Pantone match. If your logo uses a color we do not stock, we will suggest the nearest option and confirm with you before cutting.
Vector files like AI, EPS, SVG or PDF give the cleanest cut lines. A high-resolution PNG or JPG also works for simple logos with one or two colors. We review every file and contact you if anything needs adjustment.
Static cling needs a very smooth, non-porous surface like glass or polished gelcoat, and it holds best on windows. For hull sides and textured areas, we recommend an adhesive matte, gloss or clear Vinyl Decal instead.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
