By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
Turn your business logo into a durable truck decal printed on Cast Vinyl in your choice of matte, gloss, clear or static cling finish. Made for work trucks, trailers and fleet doors that rack up miles.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
You already have the logo. We turn it into custom logo stickers sized for truck doors, tailgates, tool boxes and trailer panels. Send your artwork as a vector file or a high-resolution image, and we print it on Cast Vinyl in your choice of matte, gloss, clear or static cling finish. Matte reads clean under bright sun with minimal glare, gloss pops with color depth, clear lets the paint show through around your design, and static cling gives you a removable option for short-term jobs or leased vehicles. Choose 4, 8, 12 or 18 inch widths depending on where the decal lands and how far away your customers need to read it.
A 4 inch decal suits tool boxes, fuel doors and corner placements where a small mark is enough. The 8 inch size works well on cab doors or the lower tailgate for a business name and phone number. At 12 inches, your logo starts reading clearly from across a parking lot, which makes it a common pick for box truck and trailer side panels. The 18 inch size is built for large flat surfaces like cargo doors and flatbed trailer sides where you want the logo to carry from a distance. Before ordering, measure the flat area you plan to cover and compare it to the decal width listed at checkout so the placement fits without wrapping around body lines.
Every order is printed after we receive your artwork, so nothing sits in a warehouse losing quality. We print with printed inks on Cast Vinyl, then contour-cut each decal to the outline of your logo so there is no visible background rectangle unless your design calls for one. Matte and gloss finishes are cut from solid Cast Vinyl, clear decals are printed on transparent Cast Vinyl for a painted-on look, and static cling versions use no adhesive at all, holding to smooth glass and painted surfaces by suction alone. If your file needs a small adjustment before printing, we will contact you to confirm the final proof before anything goes to press.
Application works best on a clean, dry surface above roughly 60 degrees Fahrenheit. Wash the area, remove any wax or residue with isopropyl alcohol, and let it dry fully. Peel the backing, position the decal using the transfer tape, and squeegee from the center outward to push out air. Slowly peel the tape back on itself at a flat angle. For static cling, a light mist of water on glass helps you slide the decal into place before pressing out bubbles. Wash around the decal by hand rather than with high-pressure spray aimed directly at the edges, and avoid scraping ice across it in winter.
A vector file such as AI, EPS, SVG or PDF keeps edges crisp at any size. If you only have a PNG or JPG, send the highest resolution version you have and we will review it before printing and contact you if there are any issues.
Warm the decal gently with a hair dryer and peel it back slowly at a flat angle. On original factory paint this normally comes off cleanly. Static cling uses no adhesive at all, so it removes instantly with no residue.
Yes. Place a separate order for each width, choosing 4, 8, 12 or 18 inches each time. Many customers pair a large door decal with smaller ones for tool boxes or windows.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
