Custom Logo Car Door Decals | Vinyl Pair, 4 Sizes

Description

A pair of custom logo door decals cut from durable vinyl, made with your own artwork. Ideal for drivers, small businesses, and teams who want matching graphics on both front doors.

Your Logo, Cut to Order in Cast Vinyl

Send us your logo, mascot, lettering, or original artwork and we will cut and prepare a matching pair of door decals sized to your choosing. Each decal is printed on Cast Vinyl, a thin, flexible material that conforms to the gentle curves of a door panel without lifting at the edges. You pick the finish that suits your design: matte for a low-profile, painted-on look, gloss for a bold Graphic punch, clear for artwork that floats on the paint, or static cling for a temporary application you can reposition or remove whenever you like. Because we cut each order individually, your pair is produced together so the color and cut lines match from one door to the other. Upload your file, choose your size, and we handle the rest.

Choosing the Right Door Decal Size

This set is offered in four decal sizes: 4, 8, 12, and 18 inches, measured on the longest side of the artwork. A 4-inch pair works well for small icons, monograms, or a subtle Graphic near the handle. The 8-inch size is a popular middle ground for a name or simple mark that reads clearly from a few car lengths away. At 12 inches, your logo starts to carry real presence on the door, and 18 inches makes a statement suited to larger graphics, full wordmarks, or bold mascots. If your artwork is wide rather than tall, the longest side still determines the size you select. When in doubt, measure the flat area of your door with a tape measure before ordering so the pair sits where you want it.

Applying Your Pair Without Bubbles

Application is a straightforward afternoon project with a few household tools. Clean the door panels with isopropyl alcohol and let them dry fully so no wax or dust sits between the vinyl and the paint. Position each decal with masking tape as a hinge, peel the backing a section at a time, and squeegee from the center outward with a credit card wrapped in a soft cloth. The Cast Vinyl's flexibility helps it lay down over slight body lines. For static cling, skip the squeegee pressure and press firmly with a soft cloth, smoothing from the middle to the edges. Keep the doors dry and untouched for the first day so the adhesive sets before washing or rain.

Caring for Decals on Daily Drivers

Once applied, your door decals handle the routine realities of a working vehicle: road spray, sunlight, car washes, and parking lot dust. Wash by hand or with a gentle touch-free wash, and avoid high-pressure nozzles aimed directly at the decal edges, since direct spray can work water underneath over time. Skip waxes and detail sprays on the decal surface itself, as some products can haze the finish. If you chose static cling, lift and reposition it with clean fingers and re-press it smooth after cleaning the glass or paint beneath. When you eventually remove an adhesive decal, warm it gently with a hair dryer on low and peel slowly at a shallow angle to keep the paint underneath looking its best.

What you get

• Sold as a matching pair, one decal per door
• Cut from your own logo or artwork, made to order
• Four decal sizes: 4, 8, 12, or 18 inches
• Choice of matte, gloss, clear, or static cling finish
• Cast Vinyl conforms to curved door panels
• Individually weeded and masked, ready to apply
• Made in the USA and shipped flat to protect the cut lines

Specifications

Frequently asked questions

What file should I send for my custom logo?

A vector file such as AI, EPS, SVG, or a high-resolution PDF gives the cleanest cut. If you only have a PNG or JPG, send the largest version you have and we will review it and let you know whether it will cut cleanly at your chosen size before production.

Will the two door decals match each other?

Yes. Each pair is cut and masked together in the same production run, so the color and cut lines are consistent between the driver and passenger side decals.

Can I remove the decals later without damaging the paint?

Adhesive decals remove best with gentle heat from a hair dryer on low and slow peeling at a shallow angle on intact factory paint. Static cling removes with no residue at all, since it holds to the surface without adhesive.