By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A two-piece Vinyl Decal set cut with your family name and an accent design, made for living rooms, entryways and nurseries. Choose matte, gloss, clear or static cling in four decal sizes.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
Each set arrives as two separate custom wall decals that you position yourself: one carries your family name in your chosen lettering, and the second is a coordinating accent piece you can place above, beside or below it. Because the pieces are separate, you control the spacing and layout, so the finished arrangement fits your wall instead of a fixed template. Apply the name first, step back, then set the accent where it balances best. The set is printed on Cast Vinyl with a pressure-sensitive adhesive that holds to smooth painted walls, and it can be removed without heat when you are ready for a change. Static cling versions use no adhesive at all and lift off cleanly.
Four finishes are available. Matte blends into flat interior paint and reads like it was painted directly on the wall. Gloss adds light and works well on semi-gloss trim or glass. Clear vinyl keeps the design floating with a nearly invisible background. Static cling is the pick for renters, dorms or any surface you want to leave untouched, since it peels off with no residue. Sizes run 4, 8, 12 or 18 inches, measured by the decal height. A 4-inch pair suits a small frame or shelf edge, 8 inches fits above a doorway, 12 inches sits nicely over a console table, and 18 inches makes a statement on a main wall. Pick the size that matches your space, not the biggest option.
Every order is cut after you submit your name, so nothing here sits in a warehouse waiting for a generic surname to match. Enter the family name exactly as you want it to appear, check the spelling twice, and we print it. This is the same process behind all of our custom wall decals: your text goes from the order to the cutter to the mailer. Because each set is made to order, review your spelling and capitalization carefully before checkout, since we cut what you type. If you are ordering for a gift, the recipient's wall is the limit - a newly married couple, new homeowners or a nursery waiting for a name all work well.
Application takes a few minutes with no special tools. Clean the wall with a dry cloth, peel the backing, and press the decal from the center outward to push air toward the edges. A credit card wrapped in a soft cloth works as a squeegee. Adhesive sets are repositionable briefly during placement, so if the name sits crooked, lift and reset it before pressing it down firmly. Avoid freshly painted walls; give paint a few weeks to cure first. Once applied, the decal wipes clean with a damp cloth. When it is time to remove it, peel slowly from a corner. Static cling pieces can be saved on their original liner and reused on another smooth surface.
Sizes are measured by decal height. As a guide, 4 inches works for small accents, 8 inches for above doorways, 12 inches for furniture-height placement, and 18 inches for a focal wall. Measure your wall space before ordering rather than guessing.
On walls in good condition with fully cured paint, the adhesive version peels away slowly without heat. If your paint is old, flaking or freshly applied, choose the static cling finish, which uses no adhesive at all.
Yes. The name and accent decals are separate, so you can place the accent above, below or beside the name, adjust spacing, or split them across two walls in the same room.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
