Gloss Motocross Sponsor Style Helmet Sticker Sheet

Description

A gloss-finish sponsor-style sticker sheet for motocross helmets, gear boxes, and pit setups. Cut from Cast Vinyl in your choice of 4, 8, 12, or 18 inch decal sizes.

Sponsor-Style Helmet Stickers With a Gloss Finish

Give your lid the look of a full factory race program with this sponsor-style sticker sheet. The gloss finish catches light the same way printed race graphics do, so each decal reads crisp and bold against helmet shells, tool chests, trailers, and pit boards. The sheet is printed on Cast Vinyl, which conforms to the gentle curves of a helmet better than thicker films and lays down smooth without fighting you. Choose the decal size that fits your build: 4 inch for small accents, 8 inch for a balanced layout, or 12 and 18 inch sheets when you want full coverage across the shell. Every decal is cut for peel-and-stick application, so you can lay out your own arrangement rather than being locked into one fixed design.

How to Apply Your Motocross Sticker Sheet

Start with a clean, dry surface; wipe the helmet or panel with isopropyl alcohol and let it fully dry. Peel each decal from the sheet and position it before pressing it down, working from the center outward to push air toward the edges. On curved areas of a helmet, apply gently and let the Cast Vinyl relax into the contour rather than stretching it hard. A soft squeegee or the edge of a card wrapped in a cloth helps smooth larger decals. Avoid applying in cold conditions or on surfaces that are hot to the touch. Take your time with placement, since the sheet gives you multiple decals to arrange in whatever pattern suits your gear, and repositioning is easiest before firm pressure is applied.

Where Riders Use These Decals

Motocross and Off-Road riders put these sheets to work in a lot of places beyond the helmet. They show up on gear bags, chest protectors, fenders, toolboxes, truck tool chests, pit bikes, garage walls, and trailer doors. The gloss finish holds its look indoors and out, and the Cast Vinyl base resists everyday scuffs from transport and handling. Because the decals come in a range of sizes on one sheet, you can run large pieces on flat surfaces and smaller ones on tight spots like visors, fork guards, or hand guards. If you are building a pit area or supporting a local race program, the sheet gives you enough pieces to carry one consistent look across everything you bring to the track.

Choosing Your Decal Size

The 4 inch size works well for subtle accents, visor edges, and small gear items where you want the sponsor look without dominating the surface. The 8 inch sheet is a popular middle ground for helmets and bags, offering enough decals for a full layout while staying easy to position. The 12 and 18 inch options suit riders covering larger helmets, bike plastics, or flat panels like toolboxes and trailer doors. All sizes are cut from the same Cast Vinyl with the same gloss finish, so the look stays consistent no matter which sheet you pick. If you are layering decals across multiple surfaces, ordering two different sizes lets you mix large statement pieces with smaller fills for a finished race-style arrangement.

What you get

• Printed on Cast Vinyl for a smooth, contour-friendly application
• Gloss finish for a bold, race-Graphic look
• Available in 4, 8, 12, or 18 inch decal sizes
• Peel-and-stick application on helmets, gear, and flat panels
• Multiple decals per sheet for custom layouts
• Matte, gloss, static cling, and clear finishes available across our

Specifications

Frequently asked questions

Will these decals stick to a curved motocross helmet?

Yes. The sheet is printed on Cast Vinyl, which is the more conformable option for curved surfaces like helmet shells. Apply gently from the center outward and let the material relax into the contour.

What size sheet should I choose?

The 4 inch size suits small accents, the 8 inch works well for most helmets and gear bags, and the 12 or 18 inch sheets are better for larger helmets, bike plastics, or flat panels like toolboxes and trailer doors.

Can I use these on surfaces other than my helmet?

Yes. Riders apply them to gear bags, tool chests, trailers, garage walls, and pit equipment. Any clean, dry, smooth surface is a candidate for peel-and-stick application.