Phone Number Vinyl Lettering Kit for Car and Truck Windows

Description

A pre-spaced vinyl lettering kit that puts your business phone number on truck and car windows in minutes. Cut for clean, professional results without hiring a sign shop.

Why a Phone Number Kit Beats Hand-Applied Stickers

When your number is your advertising, sloppy lettering costs you calls. This kit arrives pre-spaced on a single carrier sheet, so every digit lines up in a straight row the first time. There is no measuring between individual characters, no crooked numbers, and no gaps that widen as you work across the glass. The set includes transfer tape, a squeegee card, and step-by-step instructions written for first-time installers. Choose a width from 12 to 48 inches depending on how far away you want the number to read. A 12-inch set suits a sedan side window, while the larger widths work on cargo vans, box trucks, and trailer doors where you want drivers behind you to catch the digits at a glance.

Vinyl Lettering for Car Windows That Stays Readable

Window lettering lives a hard life: sun, road spray, car washes, and ice scrapers all work against it. We cut this kit from cast vinyl, the conformable grade sign installers choose for curved surfaces and outdoor use. The matte finish cuts glare so the digits stay legible in direct sun, while the gloss option gives the crisp, painted-on look many contractors prefer. Both finishes are stocked in matte and gloss, and we recommend gentle washing to keep them looking their best. Because the vinyl is cut rather than printed, there is no ink layer to scratch off. The letters are individual cut pieces held together by the carrier sheet, so the finished result looks like it was applied one character at a time by a pro.

Applying Your Number in Under 15 Minutes

Start with clean, dry glass at a moderate temperature, out of direct sun if possible. Position the carrier sheet with small strips of masking tape as a hinge, then peel the backing away. Squeegee from the center outward to bond the letters, working air toward the edges. Pull the carrier sheet back slowly at a sharp angle so the digits stay on the glass. That is the entire process. One person can install a full-width set alone, and the instructions include tips for aligning on tinted glass and for repositioning before you squeegee. If you manage a small fleet, each kit is packaged so you can hand one to a driver with confidence the number will go on straight.

Sizing and Layout Guidance

Width options run from 12 to 48 inches, measured across the full line of digits. As a rough guide, a 12-inch set fits a rear side window on a pickup, 24 inches suits a sedan rear glass or tailgate, and 36 to 48 inches fills the back of a van or trailer door. Taller vehicles benefit from the wider sets because the viewing distance is longer. Enter your phone number exactly as you want it cut, including area code, spaces, and any punctuation. The layout is cut to order, so double-check the digits before checkout. Need the number paired with a business name or logo? This kit is designed for standalone numbers, and our shop can help you plan a combined layout as a separate order.

What you get

• Pre-spaced lettering on one carrier sheet for straight, even application
• Cut to order from cast vinyl in matte or gloss finish
• Width options from 12 to 48 inches across the full number
• Includes transfer tape, squeegee card, and illustrated instructions
• Digitally cut characters with no printed ink to scratch or fade
• Suitable for side glass, rear windows, tailgates, and trailer doors
• Removable with heat when it is time to update your number

Specifications

Frequently asked questions

Can I remove the lettering later if my number changes?

Yes. Warm the letters with a hair dryer or heat gun on a low setting and peel them away slowly. Any remaining adhesive residue can be cleaned off the glass with an adhesive remover and a plastic scraper.

Will the lettering work on tinted windows?

It applies to the outside surface of the glass, so factory tinting underneath is not a problem. The instructions include alignment tips that make it easy to center the number on tinted rear glass.

How do I know which width to choose?

Measure the flat area of glass where the number will go and choose a width that fits within it. As a guide, 12 inches suits side windows, 24 inches fits rear glass or tailgates, and 36 to 48 inches fills van and trailer doors.