Skull Flame Truck Hood Decals - Matte Vinyl Graphic Set

Description

A skull and flame hood graphic decal set for truck owners who want aggressive front-end style. Printed on cast vinyl in your choice of matte, gloss, clear or static cling finish.

A Skull Flame Graphic Built for Truck Hoods

This truck hood decal set turns a plain hood into the focal point of your build. The design pairs a detailed skull with trailing flame accents that read clearly from a distance, so it works whether you park at a show or roll down the highway. Each set is cut and sized to sit across the hood line, and you choose the overall width from 12 to 48 inches, letting you scale the graphic from a subtle accent on a compact truck to a full-width statement on a long hood. The artwork is printed at high resolution so fine details in the shading and flame edges stay crisp at larger sizes rather than turning soft or pixelated.

Choose Your Finish and Width

Every set is available in four finishes: matte for a painted-on look that cuts glare, gloss for depth and shine, clear for a layered overlay effect on painted or tinted surfaces, and static cling for a temporary, adhesive-free application you can reposition or remove in seconds. Width options run from 12 to 48 inches, measured across the widest point of the graphic. If you want the flames to wrap toward the fenders, a wider set gives you more reach; if you want the skull centered near the scoop or hood vent, a smaller width keeps the composition tight. Measure your hood before ordering so the set sits where you want it.

Cast Vinyl That Handles Daily Driving

We print on cast vinyl, the conformable film that follows gentle hood curves and body lines without lifting at the edges. The matte and gloss options use an adhesive that holds through car washes, rain, and road spray, yet releases cleanly when warmed during removal. Application is a wet or dry install with transfer tape: position the graphic, squeegee from the center outward, and peel the carrier. Full surface prep instructions ship with every set. Because hoods take the most sun and stone exposure of any panel, we recommend a quality wax or sealant over the installed decal, which also helps the edges blend into the paint.

Why Order This Hood Graphic From Us

Each set is printed to order in our US shop rather than pulled from a warehouse shelf, so you get fresh vinyl with full adhesive strength, not stock that has aged on a shelf. We inspect every graphic before it ships and pack it flat with a protective liner so it arrives without creases. If you are building a themed truck, this skull flame design pairs well with our other body panel decals for tailgates, fenders, and doors. Ordering is simple: pick your finish, pick your width, and we cut and print the same day in most cases, with tracking sent as soon as your set leaves the shop.

What you get

• Skull and flame graphic set designed for truck hoods
• Width options from 12 to 48 inches, measured at the widest point
• Available in matte, gloss, clear, or static cling finishes
• Printed on conformable cast vinyl that follows hood curves
• Matte, gloss and clear sets install with transfer tape; static cling peels on and off without adhesive
• Printed to order in our US shop and packed flat to prevent creasing
• Includes surface prep and application instructions

Specifications

Frequently asked questions

How do I pick the right width for my truck hood?

Measure the flat area of your hood where you want the graphic to sit, between the hood seams or trim lines. Choose a width equal to or slightly smaller than that measurement. A 12 to 20 inch set works as a centered accent, while 36 to 48 inch sets spread the flames across most of the hood.

Will the decal survive car washes and weather?

The matte, gloss, and clear cast vinyl sets use an adhesive formulated for exterior vehicle use, including rain, sunlight, and touchless or hand washes. Avoid high-pressure spray directly at the decal edges for the first few days after install. Static cling is intended for shorter-term display and removes without residue.

Can I remove the decal later without damaging my paint?

Yes. Warm the graphic with a hair dryer or heat gun on a low setting and peel it back slowly at a shallow angle. Any remaining adhesive lifts with a citrus-based adhesive remover. On older or repainted hoods, test in a small hidden spot first.