Racing Stripe Truck Hood Decals | Matte & Gloss Vinyl

Description

A pair of racing stripe decals sized to run the length of your truck's hood. Cut from cast vinyl in matte or gloss finishes, sold as a set with widths from 12 to 48 inches.

Racing Stripes That Fit Your Truck Hood

This two-stripe set is cut to run down the centerline of a pickup hood, giving a clean performance look without the cost of a paint shop. Each stripe is trimmed as one continuous piece so there are no seams to line up across the hood. You choose the width, from 12 inches up to 48 inches, so you can go with slim accents or a wide, bold rally layout. The stripes arrive ready to apply with a peel-and-stick backing, and the vinyl conforms to the gentle curves and body lines found on most full-size truck hoods. Not affiliated with or endorsed by any vehicle manufacturer; measure your hood before ordering to confirm the width you want.

Matte, Gloss, Clear and Static Cling Options

Every set is printed on our cast or calendered vinyl in your choice of matte, gloss, clear or static cling. Matte gives a low-sheen, painted-on look that hides glare in bright sun. Gloss reads like fresh clear coat and matches factory paint shine. Clear stripes work well over colored hoods when you want a subtle outline effect. Static cling versions press on without adhesive and peel off cleanly, which makes them a good pick for lease vehicles, events, or anyone who wants to test the look before committing. Whatever finish you choose, the color is printed with inks rated for outdoor display so the stripes hold their tone through sun, rain and car washes.

How to Apply Truck Hood Decals

Application takes about 30 minutes with basic tools. Start with a clean, dry, wax-free hood; a wipe-down with isopropyl alcohol removes residue that keeps vinyl from bonding. Lay each stripe in place with masking tape to check alignment before removing the liner, using the hood's center crease or hood scoop as your guide. Peel the backing, mist the surface if you prefer a slide-adjust install, and squeegee from the center outward to push out air. Warm the vinyl slightly with a hair dryer to help it wrap over curves and body lines, then trim any excess at the hood edges with a sharp blade. Full step-by-step instructions ship with every set.

Why Buy Your Hood Stripes From LEO Sticker

We cut and print every set in-house after you order, so nothing sits in a warehouse losing tack before it reaches you. Each stripe is inspected, rolled, and packed with application tape, a squeegee card and illustrated instructions so you have what you need on day one. Because we offer widths from 12 to 48 inches, you can size the stripes to your exact hood instead of trimming a one-size kit and hoping the edges stay straight. If you are browsing our truck hood decals collection for other panel graphics, these stripes pair well with tailgate and fender accents in the same finish. Questions on sizing? Send us your hood measurements before ordering and we will help you pick a width.

What you get

• Sold as a two-stripe set sized for pickup truck hoods
• Width options from 12 inches to 48 inches
• Available in matte, gloss, clear and static cling finishes
• Printed on cast or calendered vinyl with outdoor-rated inks
• Conforms to hood curves and body lines with light heat
• Includes application tape, squeegee card and illustrated instructions
• Static cling version removes cleanly with no adhesive residue

Specifications

Frequently asked questions

How do I choose the right stripe width for my hood?

Measure the flat area of your hood between the body lines, then compare it to our 12 to 48 inch width options. A narrower width leaves visible paint on each side for a classic look, while wider stripes fill more of the hood. If you are between sizes, send us your measurements and we will help you decide.

Will these stripes damage my paint when I remove them?

The vinyl versions are designed to peel off in one piece when warmed gently with a hair dryer, and any remaining adhesive wipes away with isopropyl alcohol. On original factory paint in good condition, removal is typically clean. If you want zero adhesive contact, choose the static cling option, which holds by surface tension alone.

Can I wash my truck with the stripes on?

Yes. Wait about 48 hours after application before the first wash so the adhesive fully bonds. Hand washing is gentlest, and most touchless automatic washes are fine. Avoid high-pressure spray nozzles aimed directly at the stripe edges, and skip brush-style washes, which can catch and lift edges over time.