By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
Custom cut vinyl lettering made to order for your truck tailgate. Choose your text, font and width from 12 to 48 inches, and apply it yourself in minutes.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
Every set of lettering we ship is cut fresh after you place your order, so the words on your tailgate are exactly the words you typed. Enter your business name, a family name, a lake or ranch name, or a short phrase, pick a font and a color, and we cut each letter individually from solid cast vinyl. There is no background material, no printed rectangle, and no clear box around the text once installed. The result reads like paint that was lettered directly onto the tailgate. Letter height scales with the width you choose, from 12 inches up to 48 inches across, so the same set can sit small and subtle near the handle or run the full width of the gate.
A tailgate is one of the hardest-working surfaces on a truck, so we cut this lettering from cast vinyl, the grade used for vehicle graphics. It is thin enough to follow the slight texture of factory paint and flexible enough to conform around body lines without lifting at the edges. The matte finish reads like flat paint and hides glare in sunlight; the gloss finish matches most factory clear coats. Both are rated for outdoor exposure and resist washing, rain, and road grime when applied to a clean, wax-free surface. For a painted or textured bed liner area, choose a gloss or matte set and use firm squeegee pressure during installation for the best bond.
Each set arrives weeded, masked with application tape, and ready to position. Start with a clean, dry tailgate, free of wax and dust. Use the edge of the tailgate or the handle as a visual guide, or measure and mark lightly with painter's tape. Peel the backing, press the lettering in place, and squeegee from the center outward to push out air. Slowly peel the transfer tape at a low angle, and the letters stay behind. Full instructions ship with every order, and a small practice letter is included so you can test your technique before committing to the main line. Most customers finish the whole application in under an hour.
When ordering, type your exact text and check spelling carefully, since each set is custom cut and cannot be resold. Width options run from 12 to 48 inches; wider sets mean taller letters, so measure the flat area of your tailgate before choosing. If you plan to letter across a raised handle or badge, order the text in two shorter lines rather than one long line for a cleaner install. When it is time to remove the lettering, warm it with a hair dryer and peel slowly; cast vinyl typically releases in one piece without damaging paint that is in sound condition. Any residue can be cleaned with a mild adhesive remover.
Measure the flat area where you want the text before ordering. Widths from 12 to 48 inches cover everything from a short name near the handle to a full-width line across the gate. If your text needs to cross a raised handle or badge, split it into two lines for a cleaner application.
Cast vinyl is the material used for vehicle graphics and is rated for outdoor exposure, including washing and weather. Actual lifespan depends on your climate, how the truck is stored, and how the surface was prepared, so we do not quote a specific time figure.
Yes. Warm the letters with a hair dryer and peel slowly from one edge. On paint in sound condition, cast vinyl typically comes off cleanly, and any remaining residue can be removed with a mild adhesive remover.
12", 18", 24", 36", 48"
Your shopping cart is empty
Notifications
