Motorcycle Helmet Stickers Pack of 50 | Vinyl Decals

Description

A 50-piece pack of die-cut vinyl decals sized for motorcycle helmets, tanks, toolboxes and riding gear. Made for riders who want to personalize their kit with a matte or gloss finish.

50 Motorcycle Helmet Stickers in One Pack

This decal pack gives you fifty individual designs sized to fit the curved, compact surfaces of a helmet shell. Each sticker is die-cut to its own outline, so there is no clear border or printed background to trim away. Choose from 4, 8, 12 or 18 inch sizes depending on where you plan to place them: smaller decals work well on helmet sides and visor trim, while the larger cuts suit fairings, saddlebags or a garage toolbox. The pack is printed on cast vinyl, which is thin enough to conform to curves without lifting at the edges. Riders, commuters and weekend cruisers can mix and match designs across their gear for a consistent look.

Matte, Gloss, Clear and Static Cling Options

Every decal in this pack is available in the finish that fits your helmet best. Matte cuts down glare under direct sun, which many riders prefer on the upper shell where light hits hardest. Gloss adds depth and a polished look that pairs well with full-face helmets in darker colors. Clear decals let the helmet's paint show through around the artwork, and static cling gives you a removable option that peels off without adhesive residue, handy for loaner helmets or seasonal designs. All finishes are printed with printed inks on cast or calendered vinyl, so colors stay true through regular rides and washes.

How to Apply Your Helmet Decals

Application takes a few minutes per sticker. Start with a clean, dry surface: wipe the helmet with isopropyl alcohol and let it fully evaporate. Peel the decal from its backing, position it on the shell, and press from the center outward to push air toward the edges. For curved areas, warm the decal slightly with a hair dryer on low so the vinyl stretches into the contour, then hold it in place for a few seconds. Avoid applying over vents, seams or textured rubber trim, since those surfaces do not give the vinyl full contact. Wait 24 hours before riding in rain or washing the helmet so the adhesive bonds completely.

Beyond the Helmet: Where Riders Use These Decals

Motorcycle helmet stickers are just the starting point for this pack. The same cuts work on fuel tanks, windscreen edges, panniers, top cases, trailer panels and tool chests. Many riders keep a few decals back for their garage fridge, laptop or hard-sided luggage so their style carries through everything they carry. Because each decal is individually cut, you can space them out across multiple surfaces instead of using the whole pack on one helmet. The 4 inch size is the most flexible for tight spots, while the 12 and 18 inch cuts make a statement on flat panels. Gift the pack to a riding club member or split it among friends on a group ride.

What you get

• 50 die-cut vinyl decals per pack, each with its own outline
• Available in 4, 8, 12 or 18 inch decal sizes
• Choose matte, gloss, clear or static cling finish
• Cast vinyl conforms to curved helmet shells
• printed inks for regular outdoor riding
• Static cling version removes without adhesive residue
• Suitable for helmets, tanks, panniers, toolboxes and gear

Specifications

Frequently asked questions

Will these stickers stick to a curved helmet?

Yes. The decals are printed on cast vinyl, a thin material that conforms to curves. For tight contours, warm the decal with a hair dryer on low and press from the center outward.

Can I remove the decals later?

Static cling decals peel off cleanly with no residue. Adhesive-backed decals can be removed by warming them gently and peeling slowly; any leftover adhesive comes off with isopropyl alcohol.

Which size should I choose for a helmet?

The 4 inch size fits most helmet sides and works around vents and trim. The 8 inch size suits larger flat areas of the shell. Reserve 12 and 18 inch decals for tanks, fairings or flat panels.