By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
This three-piece funny baby on board sticker set is made for family car windows, adding a lighthearted warning to tailgaters. Each gloss vinyl decal uses removable adhesive, so it peels off cleanly when you no longer need it. It sits alongside the other baby on board sign collection in the shop.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This set includes three matching decals designed for the rear window of a family car, minivan, or SUV. Each one carries the classic baby on board message with a humorous twist, so drivers behind you get a smile along with the heads-up. The gloss vinyl finish catches the light and keeps the artwork looking crisp from a distance. Because you receive three pieces, you can place one on the rear window and keep spares for a second vehicle, a future car seat upgrade, or a gift for another new parent. They work on smooth glass and similar flat exterior surfaces, applied from the outside where following drivers can actually read them.
The set comes in three size options: 4 inch, 6 inch, and 8 inch. A 4 inch decal is a good fit for a corner of a sedan rear window or a smaller glass area where you want the message present but subtle. The 6 inch size is the middle ground, readable from a reasonable following distance without dominating the window. Choose the 8 inch version for larger rear glass, such as a minivan or SUV, where a bigger decal stays proportionate and easy to spot in traffic. Whichever funny baby on board sticker size you pick, all three pieces in the set come in that same dimension, so your windows stay consistent across vehicles.
Start with a clean, dry window free of dust, wax, or grime, since debris under the vinyl causes bubbles and lifting. Peel the backing away and position the decal on the glass, pressing from the center outward to push air toward the edges. The removable adhesive lets you reposition during install, so if the first placement is crooked, lift it gently and try again before pressing it down firmly. Work the edges with a fingertip or a soft card wrapped in cloth to seal them fully. Avoid applying in freezing temperatures or direct hot sun, as extreme temperatures make vinyl harder to handle. Allow the decal to set before washing the car.
Once applied, the decals need very little attention. Wash around them gently by hand rather than blasting them with high-pressure sprays at close range, and skip scraping them with ice scrapers or brushes in winter. The gloss surface wipes clean with a soft damp cloth if road grime builds up. Because the adhesive is removable, you can take a decal off when it is time, and it lifts off without residue, leaving the glass ready for the next sticker or nothing at all. Warm the vinyl slightly with a hair dryer on low before peeling if it has been on the window a long while, then pull slowly and steadily at a shallow angle.
This funny baby on board sticker set is made for new parents, expecting families, and anyone hauling a little passenger in a car seat. It also works as a small, practical baby shower or new-baby gift, since the three-piece count covers more than one car or leaves a spare. The humor keeps the safety message friendly rather than preachy, which suits drivers who want a bit of personality on the back window. Grandparents and caregivers who transport infants part-time can rotate a decal onto whichever vehicle is in use. If you want a lighthearted way to ask for a little extra following distance, this set does the job.
Yes. Each set contains three identical decals in the size you select at checkout, whether that is 4 inch, 6 inch, or 8 inch. That way you can outfit two vehicles and keep a spare, or use all three on one car, with a consistent look across every window.
No. The decals use removable adhesive, so they peel off cleanly when you are finished with them. If a decal has been on the glass for a long time, warm it briefly with a hair dryer on low and pull slowly at a shallow angle. No residue is left behind.
The adhesive is designed to reposition during installation, so you can lift and adjust placement while you are first applying it. Once the decal has been pressed down and set for an extended period, it is intended for removal rather than long-term reuse, so plan your placement before committing.
The 4 inch size suits smaller windows or a subtle corner placement on a sedan. The 6 inch decal is a balanced middle option for most cars. For larger rear glass on a minivan or SUV, the 8 inch version stays proportionate and remains easy for following drivers to read at a distance.
4 inch, 6 inch, 8 inch
Your shopping cart is empty
Notifications