By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
This baby on board sticker for truck windows is a large-format vinyl decal sized for pickup rear glass. It alerts other drivers that a child is riding with you and peels off cleanly when you no longer need it. This design is part of our baby on board sticker range range.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
Pickup trucks sit higher than most cars, and small warning decals get lost in that big rear window. This baby on board sticker for truck use is cut at a scale that reads clearly from following traffic, whether you drive a crew cab daily or tow a trailer on weekends. It applies to the inside or outside of your rear window glass and delivers a simple message: drive carefully, a child is on board. The decal is printed on removable adhesive vinyl, so it stays put through daily commutes, car washes, and road trips, yet it lifts off without residue when your little one outgrows the need for it. One decal per pack, ready to apply straight from the mailer.
The 8 inch size suits smaller rear windows, sliding glass panels, or drivers who want a subtle notice. The 12 inch option is the middle ground most pickup owners choose, large enough to read from a reasonable following distance without dominating the glass. The 18 inch version is built for full-size truck rear windows and anyone who wants maximum visibility, such as drivers hauling boats, campers, or work trailers where the decal needs to stand out at a distance. Measure the flat, clear area of your rear window before ordering, and remember that tinted glass can affect how bold the decal appears from outside. All three sizes share the same material and print quality.
Start with a clean, dry window. Wash the glass, remove any wax or film residue, and let it dry completely. Peel the decal from its backing and position it on the glass, starting from one edge. The removable adhesive vinyl repositions during install, so if your first placement is crooked, simply lift the decal and try again before pressing it down firmly. Work from the center outward with a squeegee or the edge of a credit card to push out air bubbles. Avoid applying in freezing temperatures or direct blazing sun, as extreme cold and heat make vinyl harder to work with. Most installs take under ten minutes from start to finish.
Once applied, the decal needs almost no attention. When washing your truck, avoid aiming a high-pressure washer nozzle directly at the decal edges, since concentrated spray can work under the vinyl over time. For regular cleaning, a soft cloth or sponge with mild soap and water is all you need, and you can wipe gently over the decal surface. Skip abrasive scrubbers and harsh solvent cleaners on the printed area. If you notice an edge starting to lift, press it back down with firm thumb pressure on clean, dry glass. With basic care, the decal holds its look through seasons of daily driving.
This decal is made for parents, grandparents, and caregivers who drive pickups with infants or toddlers on board. It fits new parents stocking the nursery and the truck at the same time, daycare commuters making the same route every morning, and family members who only carry a car seat on weekends. It also works for anyone who wants a courteous heads-up for tailgaters on the highway or in busy school pickup lines. Because the adhesive is removable, it suits leased trucks and work vehicles you plan to hand back or sell, and drivers who want the option to remove the decal without scraping or heat guns later.
No. The decal is printed on removable adhesive vinyl, so it lifts off without residue when you are ready to remove it. There is no scraping, heat gun, or sticky film left behind on the glass, which makes it safe for leased or owned trucks alike.
The 12 inch size fits most full-size truck rear windows well. Choose 8 inch for smaller windows or a subtle look, and 18 inch if you want maximum visibility from a distance, especially when towing. Measure the clear flat area of your glass before ordering.
Yes. The removable adhesive vinyl repositions during installation. Simply lift the decal and place it again before pressing it down firmly. Take your time aligning it on clean, dry glass, then squeegee from the center outward to remove air bubbles.
It is best to apply the decal in moderate temperatures. Extreme cold makes vinyl stiff and harder to position, and direct hot sun can cause it to grab the glass too quickly. Pick a mild day or apply in a garage for the easiest installation.
8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications