Baby On Board Sign, Blue, Set of 2

Description

This blue baby on board sign set of two alerts following drivers that a little one is riding with you. Made from static cling vinyl, each piece applies to the inside of your rear window and lifts off without residue. It sits alongside the other baby on board decals in the shop.

A Simple Way to Signal a Little Passenger

This two-piece blue baby on board sign is designed for the inside of your rear window, where it stays visible to drivers behind you without sitting on the paint or glass exterior. The message is a familiar courtesy on American roads: it asks tailgaters and passing traffic to give you a little extra room while your infant is on board. Because you get two matching signs in the set, you can place one on each side of a rear window, keep a spare for a second vehicle, or replace the first if it ever gets damaged during cleaning. The bold blue artwork reads clearly at a distance in daylight and under headlights at night, so the message comes across without shouting.

Picking the Right Size for Your Window

The set is offered in three sizes so it fits everything from a compact sedan to a full-size SUV or minivan. The 8 inch option suits smaller rear windows or drivers who want a subtle notice that does not block much of the view. The 12 inch size is the middle-of-the-road choice and works well on most standard sedans and hatchbacks. The 18 inch version is made for larger rear glass, such as SUVs, vans, and trucks with big back windows, where a smaller sign could get lost in the expanse of glass. Whichever size you choose, both pieces in the set match, so the pair looks balanced wherever you place them.

Applying the Sign to Your Rear Window

Application takes only a few minutes and needs no tools. Start by cleaning the inside of the rear window with glass cleaner and letting it dry completely, since dust and film keep the vinyl from gripping well. Peel the sign from its backing and press it onto the glass, smoothing from the center outward with your hand or a soft card to push out air bubbles. The material repositions during install, so if the sign sits crooked or traps a bubble, simply lift it and try again. Take care around rear defroster lines, pressing gently so the vinyl lies flat across them rather than bridging over the grid.

Cleaning and Everyday Care

Static cling vinyl is low-maintenance once it is on the glass. When you clean the inside of your rear window, work around the sign or lift it temporarily and set it aside on a flat, clean surface until the glass is dry. Avoid spraying cleaner directly onto the sign itself, and skip abrasive cloths or scrapers near the edges. If the sign loses some of its grip over time, a quick rinse with lukewarm water and air drying usually restores it. Because the material peels off cleanly and lifts off without residue, you can remove it for car washes, window tinting appointments, or whenever you no longer need it.

Who This Set Suits

This blue baby on board sign set is a practical pick for new parents, grandparents, and caregivers who regularly transport an infant and want a polite heads-up for the traffic behind them. It also works for families using a borrowed or leased vehicle, since the sign removes cleanly at the end of a lease or loan period. Rideshare drivers who sometimes carry young passengers can apply and remove it as needed between uses. If you are assembling a baby shower gift or a new-parent care package, the two-piece format makes it easy to share one and keep one. Anyone shopping for a baby on board sign blue in color will find this set covers the basics.

What you get

• Set of 2 matching blue signs for one or two vehicles
• Static cling vinyl applies to the inside of the rear window
• Available in 8 inch, 12 inch, and 18 inch sizes
• Repositions during install for a straight, bubble-free placement
• Peels off cleanly and lifts off without residue
• Bold blue design reads clearly in daylight and headlights

Frequently asked questions

Does this sign go on the inside or outside of the window?

It goes on the inside of your rear window. Applying it indoors keeps it protected from weather and car washes, and the blue design is still clearly visible to drivers behind you through the glass. Just take care when smoothing it across rear defroster lines so it lies flat.

Will it leave residue when I take it off?

No. The static cling vinyl peels off cleanly and lifts off without residue, so you can remove it whenever you no longer need it or before a window tinting appointment. If it has been in place a while, peel slowly from one edge and it should come away from the glass intact.

What if I get bubbles or the sign sits crooked?

The material repositions during install, so simply lift the sign and press it back down, smoothing from the center outward with your hand or a soft card. Starting with a freshly cleaned, fully dry window helps the vinyl grip evenly and prevents most bubbles from forming.

Which size should I choose for my vehicle?

The 8 inch suits compact cars and smaller rear windows, the 12 inch fits most standard sedans and hatchbacks, and the 18 inch is made for the larger rear glass of SUVs, vans, and trucks. If you are between sizes, the 12 inch is a safe middle choice for most vehicles.