By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
This two-piece pink baby on board sign clings to the inside of your car window to let other drivers know a little one is riding along. Made from static cling vinyl, it applies in minutes and lifts off without residue. This design is part of our the baby on board collection range.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This baby on board sign is a simple way to tell tailgaters and passing traffic that an infant is on board, giving them a reason to hang back and pass with care. The set includes two identical pink signs, so you can outfit a second vehicle, keep a spare in the glovebox, or place one in each of two rear windows. Each sign is printed on static cling vinyl designed to go on the inside of the glass, where it stays clean and protected from road grime. The soft pink color reads clearly against most window tints and interior shades. It is a small addition to the car that fits naturally alongside car seats, mirrors, and the rest of the baby gear that comes with a new arrival.
The sign comes in three sizes, and the right one depends on your window and how visible you want it to be. The 8 inch size suits compact cars and smaller rear quarter windows, where space is tight but the message still needs to read at a glance. The 12 inch option is a middle-of-the-road choice that works well on most sedans, hatchbacks, and crossovers, filling the lower corner of a back window without blocking much of the view. The 18 inch size is made for SUVs, minivans, and trucks with large rear glass, where a smaller sign can get lost. Whichever you choose, both signs in the set are the same size, so placement stays consistent across vehicles.
Installation takes only a few minutes and requires no tools. Start by cleaning the inside of the window with glass cleaner and letting it dry completely, since dust and fingerprints are the main reason static cling fails to hold. Lightly mist the glass with water, position the sign, and press it flat from the center outward with a squeegee or the edge of a card to work out bubbles. Because the vinyl repositions during install, you can peel it back and try again if the placement is crooked. Step back and check the view from the driver's seat before calling it done, and adjust if it interferes with your line of sight.
Static cling vinyl asks very little of you once it is up. Wipe the sign gently with a soft, damp cloth when you clean your windows, and avoid abrasive pads or ammonia-heavy sprays applied directly to the printed surface. If the sign loses grip over time, a quick rinse with warm water refreshes the cling, and it can be reapplied to clean glass. When you no longer need it, the sign peels off cleanly and lifts off without residue, leaving the window exactly as it was. That makes it easy to move between cars or remove entirely once your little one has outgrown the infant stage, with no scraping or adhesive remover required.
This set is made for new and expecting parents who want a courteous heads-up on the road without a permanent sticker on their glass. It is a practical pick for families with two cars, grandparents who shuttle the baby on weekends, and caregivers or nannies who use their own vehicle for school runs and appointments. The removable nature also suits leased cars and rentals, where adhesive decals are off-limits. If you are assembling a baby shower gift or a new-parent care package, a pink baby on board sign is a small, useful addition alongside the usual gear. It also works well for parents of twins who want matching signs for both sides of the back window.
It goes on the inside of the glass. Static cling vinyl is designed to grip smooth interior window surfaces, which keeps the sign protected from weather, car washes, and road grime. Applying it inside also means you can adjust or remove it from the comfort of your seat rather than stepping outside.
No. The sign uses static cling rather than permanent adhesive, so it peels off cleanly and lifts off without residue. There is nothing to scrape or dissolve with adhesive remover, which makes it safe for leased vehicles, rentals, and any car where you want the glass returned to its original condition.
The vinyl repositions during install, so you can peel it back and try again without losing grip. Press from the center outward with a squeegee or card edge to push bubbles to the edge. If the cling weakens later, a rinse with warm water refreshes it for reapplication.
The 8 inch suits compact cars and small windows, the 12 inch fits most sedans and crossovers, and the 18 inch works best on SUVs, minivans, and trucks with large rear glass. If you are between sizes, consider how far the sign needs to read from behind your vehicle and how much window space you can spare.
8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications