By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A clear vinyl new driver sticker for rear glass printed with white ink, so only the lettering shows once applied. Sized for teens, driving students, and anyone new behind the wheel. You can see the rest of the new driver window decals here.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This new driver sticker for rear glass is printed on clear vinyl with white ink, a combination designed specifically for glass. The transparent film disappears against the window, and the white ink makes the lettering stand out so other drivers can read it easily. It is intended for the rear glass of a car, truck, or SUV, where following drivers are most likely to see it. Because the background is clear rather than a solid rectangle, the finished look is clean and understated from inside and outside the vehicle. It is a simple way to signal that the person driving is still gaining experience, which encourages patience from surrounding traffic during those first months on the road.
The sticker comes in three sizes so it fits different vehicles and preferences. The 4 inch option is subtle and works well on a smaller rear window, a corner of the glass, or for families who want a low-key signal. The 8 inch size is the middle ground and reads clearly from a reasonable following distance on most sedans and crossovers. The 12 inch version suits larger rear glass, such as trucks, vans, and SUVs, and stays legible from farther back on highways. All three sizes use the same clear vinyl and white ink construction, so the only difference is the footprint on the window. Measure your rear glass before ordering to pick the proportion that looks right.
Start with a clean, dry rear window free of dust, wax, or grime, since debris under the film causes bubbles. Position the sticker before removing the backing, holding it up to the glass to find your placement. Peel the backing away, align the sticker, and press from the center outward to push air toward the edges. The removable adhesive lets you reposition during install, so if it lands crooked, lift it gently and set it again before pressing it down fully. Work the surface flat with a squeegee or the edge of a card. Avoid applying in freezing temperatures or direct hot sun, as extreme cold or heat makes the vinyl harder to work with.
Once applied, the sticker holds up to normal driving conditions and routine car washes. For hand washing, wipe over it gently with a soft cloth rather than scrubbing the lettering directly. Skip high-pressure wash wands aimed at the edge of the decal, since a direct blast can lift a corner over time. When it is no longer needed, the removable adhesive means the sticker peels off cleanly by lifting one edge and pulling slowly at a low angle. It lifts off without residue, so the rear glass is ready for the next decal or nothing at all. If any small bits cling, warm the area slightly and they come away easily.
This new driver sticker for rear glass is made for the situations where a little extra awareness helps. Parents of teens with a fresh license can give following drivers a heads-up during the learning curve. Adult drivers returning to the road after years away, exchange students, or anyone completing supervised driving hours also benefit from the courtesy it invites. Driving schools can include it with student materials so graduates stay visible while they build confidence. Because the clear vinyl keeps the look minimal, it works for drivers who want the message without a bold colored badge on the window. At $24.99, it is an inexpensive way to encourage patience around an inexperienced driver.
No. The clear vinyl is designed to blend into the glass so only the white ink lettering shows. From a distance the message appears to sit directly on the window, which keeps the look clean and avoids a solid block of color on your rear glass.
The 4 inch size suits small windows or a subtle corner placement, the 8 inch fits most sedans and crossovers, and the 12 inch works well on trucks, vans, and SUVs with larger rear glass. Measure your window and pick the size that stays legible without crowding the glass.
Yes. The sticker uses a removable adhesive, so it peels off cleanly when you are done with it. Lift one edge and pull slowly at a low angle, and it lifts off without residue, leaving the rear glass clean for the next decal or nothing at all.
The adhesive repositions during installation, so lift the sticker gently and reset it before pressing it down fully. To avoid bubbles, press from the center outward to push air toward the edges, and apply to a clean, dry window free of dust or wax.
4 inch, 8 inch, 12 inch
Your shopping cart is empty
Notifications